Shur-Lock II

Shur-Lock II
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16" nut driver) and locking ring. A pre-lubricated O-ring forms an airtight seal to withstand 125 psi. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.

Features

  • One person installation
  • Re-enterable, no special tools required
  • Airtight and watertight
  • No I.D. reduction
  • Excellent pull out strength on HDPE, PVC, FRP, and steel
  • No-Stop version available for confined areas or repairs
  • ETL Listed to CSA STD C22.2 18.3-04
  • Listed to UL STD 514B
Ask your question Buy
Shur-Lock II

Technical Specifications

Select Coupler Type

No-Stop
Straight
Part # Description Nominal OD (in.) ETL Listed Height (in) Pull Out Strength (lb) Packaging Amount of Items/Case
20002340 1.00" NS Shur-Lock II 1.315 " ✔ 5.7 " 600 lb Case 10
20000236 1.25" NS Shur-Lock II 1.66 " ✔ 5.7 " 700 lb Case 10
20002341 1.50" NS Shur-Lock II 1.9 " ✔ 5.7 " 800 lb Case 10
20000237 2.00" NS Shur-Lock II 2.375 " ✔ 5.7 " 800 lb Case 10
20000238 2.50" NS Shur-Lock II 2.875 " ✔ 9.25 " 1000 lb Case 6
20000239 3.00" NS Shur-Lock II 3.5 " ✔ 10.75 " 1000 lb Case 6
20000260 4.00" NS Shur-Lock II 4.5 " ✔ 12 " 1000 lb Case 4
20001531 5.00" NS Shur-Lock II 5.563 " ✔ 14.25 " 1000 lb Case 2
20000261 6.00" NS Shur-Lock II 6.625 " ✔ 14.25 " 1000 lb Case 2
20000118 1.00" Shur-Lock II 1.315 " ✔ 5.7 " 600 lb Case 10
20000120 1.25" Shur-Lock II 1.66 " ✔ 5.7 " 700 lb Case 10
20000122 1.50" Shur-Lock II 1.9 " ✔ 5.7 " 800 lb Case 10
20000121 1.25" HYB Shur-Lock II 1.59 " 5.7 " 700 lb Case 10
20000123 2.00" Shur-Lock II 2.375 " ✔ 5.7 " 800 lb Case 10
20000264 2.00" EXT Shur-Lock II 2.375 " 8.25 " 800 lb Case 10
20000172 2.50" Shur-Lock II 2.875 " ✔ 9.25 " 1000 lb Case 6
20000173 3.00" Shur-Lock II 3.5 " ✔ 10.75 " 1000 lb Case 6
20000245 4.00" Shur-Lock II 4.5 " ✔ 12 " 1000 lb Case 4
20000254 5.00" Shur-Lock II 5.563 " ✔ 14.25 " 1000 lb Case 2
20000256 6.00" Shur-Lock II 6.625 " ✔ 14.25 " 1000 lb Case 2

Downloads

Specifications
DL_ShurLock Coupler_3.2019

Other couplers

Push-Lock

Push-Lock

Installation is fast and easy; no heat or tools are needed. Simply push the duct ends into the coupler for a locked and air-sealed assembly. The compact profile of the Push-Lock is well suited for use in pull boxes, vaults, or other limited-access areas such as narrow trenches. The non-metallic construction provides excellent corrosion resistance in buried or encased applications and also has desirable dielectric properties. The Push-Lock is non-transparent and contains UV inhibitors, but is not recommend for aerial applications.
Aluminum Threaded

Aluminum Threaded

Reverse-threaded aluminum coupler. Tapered threads accommodate a wide range of conduit OD's within a given conduit size. Also available in a Riser/Plenum rated version.
E-LOC

E-LOC

A low-cost PVC push-on coupler with a molded rubber gripping insert. Can be used on HDPE, PVC, Fiberglass (FRE), and metal conduit. Transition couplers are used to join ducts with different outside diameters.
Double E-LOC

Double E-LOC

The Double E-LOC versions are suitable for cable blowing applications and are UV resistant for aerial use.
Mor Clamp

Mor Clamp

The Mor Clamp coupling is quickly and easily installed by slipping onto or wrapping around a conduit joint. The thick neoprene gasket assures a positive butt joint seal. It accommodates a variety of conduit types including HDPE, cast iron, PVC, and fiberglass. The stainless steel design offers a lightweight and economical unit which is strong and durable. Zinc plated carbon steel bolts are included for tightening the Mor Clamp coupling.
Compression Coupler

Compression Coupler

Used to join and seal length of HDPE and PVC Duct. The internal double compression seal is created as the end caps are tightened. NOTE: PVC compression couplers are not recommended for high-pressure air or gas lines, or applications requiring high pull-out resistance.
Clear-Lock

Clear-Lock

Experience the same fast and easy installation of our Push-Lock couplers now with a new, clear body design. Simply push the duct ends into the coupler for a locked and air-sealed assembly. Slightly shorter than the original Push-Lock, the Clear-Lock is ideal for pull boxes, vaults or other limited access areas. The non-metallic construction provides excellent corrosion resistance in buried or encased applications and also has desirable dielectric properties.
ArmorGuard Kit

ArmorGuard Kit

Used with ArmorGuard Conduit, the ArmorGuard Kit is comprised of a Split-Lock + Coupler, a ScotchLok shield connector, and bonding braid for bonding and grounding the armored layer in the duct. This coupler arrangement is suitable for cable blowing applications.
Split-Lock +

Split-Lock +

The Split-Lock + is a split coupler produced from a glass fiber reinforced nylon resin. The coupler is heat and UV stabilized, and offers excellent impact strength. It’s reusable and is ideal for temporarily coupling conduits, particularly at slack-loop locations, and also for air-assisted jetting applications. The coupler is easily assembled using a 7/16” nut driver.
Smooth Cor Flex Kit

Smooth Cor Flex Kit

Quick, field assembly couplers or adapters to join different material types
E-LOC Plus

E-LOC Plus

A simple coupler to install and ideal where higher pull out strengths are needed. Other sizes are available, contact Customer Service for more information.
Want a better connection with Dura-Line?

Ask a question or email us a comment! We're happy to supply additional information and would love to explore how we can be of service to you.

Contact us

Want a better connection with Dura-Line?

Ask a question or email us a comment! We're happy to supply additional information and would love to explore how we can be of service to you.

Contact us